mechanical and durability study on artificial sand as fine aggregate in concrete

Experimental Study of Artificial Sand Concrete | Request PDF

Conventionally concrete is a mix of cement, sand and aggregate. There is a large variation in the strength of concrete due to variation in the strength of aggregates used. There is scarcity of ...

mechanical and durability study on artificial sand as fine ...

EFFECT OF USING STEEL SLAG AGGREGATE ON … EFFECT OF USING STEEL SLAG AGGREGATE ON MECHANICAL PROPERTIES OF CONCRETE 1Sultan A. Tarawneh, ... concrete consists of sand as fine aggregate and gravel, ... materials that may affect the strength and durability of concrete, such as chlorides, organic impurities clay and shells 1.1.

Effect of Types of Fine Aggregate on Mechanical Properties ...

replacement of natural sand with artificial sand as fine aggregate is more prominent at seven days than that on 28 days. 3. The indirect split tensile strength of concrete with river sand as fine aggregate found marginally higher than concrete with artificial sand as fine aggregate, it is 3.78MPa and 3.71MPa respectively.

artificial sand as fine aggregate for concrete

artificial sand as a fine aggregate - artificial sand as fine aggregate artificial sand fracture of concrete ppt on artificial sand as the possibility to make a mortar with a ternary sand (natural and ... Get A Free Quote

STUDY OF MECHANICAL PROPERTIES OF LIGHTWEIGHT AGGREGATE ...

aggregate and fine aggregate used as individually to study the mechanical properties of lightweight aggregate concrete. Key Words: CLC lightweight bricks, foaming agents, insulation, versatile material, Pumice stone, Ceramic tiles. 1. INTRODUCTION Concrete is a product obtained by

Mechanical and Durability Properties of Recycled Aggregate ...

It is now recognized that the recycled aggregate concrete (RAC), where natural aggregates are replaced with recycled concrete aggregates, is a promising technology for conserving natural resources and reducing the environmental impact of concrete. This paper presents a study on mechanical and durability properties of concretes manufactured with ...

Investigation on Mechanical and Durability Properties of ...

Investigation on Mechanical and Durability Properties of Fly Ash and Slag based Concrete ... Concrete is an artificial material, which is made up of cement, fine aggregate, coarse aggregates and water. ... the experimentation for concrete. Fine aggregate River sand is used as fine aggregate

Influence of Foundry Sand and Natural Pozzolans on the ...

Influence of Foundry Sand and Natural Pozzolans on the Mechanical, Durability and Micro-structural ... indicated that foundry sand has potential for being used as fine aggregate in producing durable concrete. The utilization of natural pozzolan (volcanic ash) and waste (foundry sand) not only ... variables in the study were aggregate (A) to ...

Mechanical Properties Study and Durability Indicators of ...

Mechanical Properties Study and Durability Indicators of Concrete with Polystyrene in Fine Aggregate Substitution Ana Paula Viana Reis1, ... 2009, +4AlTable 1. The artificial fine aggregate used was the one from the milled expanded polystyrene obtained by its clean material wastes. Visually its

Experimental Study on Mechanical and Durability Properties ...

Experimental Study on Mechanical and Durability Properties of Concrete Influenced By Waste Materials S.Saranya ... The river sand is used as fine aggregate conforming to the requirements of IS: ... in the concrete as a replacement for fine aggregate, reduces the costs of disposal, lowers the cost of the

Review on Mechanical and Durability properties of Concrete ...

Dr. U. Ranga Raju et.al (2016).-A study on Mechanical and Durability Properties of Concrete with Partial Replacement of Cement with Fly Ash and Fine Aggregate with Waste Glass‖.

Study on Mechanical Properties of Concrete on Partial ...

Study on Mechanical Properties of Concrete on Partial Replacement of Fine Aggregate with Copper Slag and Granite Powder Uploaded by IJIRST Concrete is the most popular building material in the world.

INVESTIGATION OF DURABILITY PROPERTIES OF MANUFACTURED ...

Sand gives excellent concrete strength and durability.In future using of M-Sand by the replacement of fine aggregates should be increased for various works. Material Properties Manufactured Sand IS Code Provisions BIS Guidelines IS: 383-1970 for selection and testing of Coarse and Fine aggregates available.

Effect of Waste Foundry Sand (WFS) on the Mechanical ...

of the use of Foundry sand as fine aggregate in concrete as a substitute to Artificial Sand. The experimental work is mainly concerned with the study of mechanical properties like compressive strength, split tensile strength as well as flexural strength of concrete by partial replacement of artificial sand by foundry sand as fine aggregate.

Study on Mechanical and Durability Properties of Concrete ...

Mechanical Properties and Durability of Concrete Made with Portland ... is Specialist on Concrete Technology of University of La Plata and head of ... The growth of Portland Limestone Cements (PLC) utilization is an objective of.

An Experimental Study on the Mechanical and Durability ...

aggregate in the production of concrete. In this study replacement of fine aggregate with steel slag, M-sand and bottom ash with 10%, 20%, 30%, 40%and 50% for grade of concrete M30are tested for finding fresh and hardened properties of concrete to identify the optimum percentage of three fine aggregate replacement materials in concrete.

Investigation on Mechanical and Durability Properties of ...

Concrete is an artificial material, which is made up of cement, fine aggregate, coarse aggregates and water. ... grade concrete, durability study and regression analysis. ... the experimentation for concrete. Fine aggregate River sand is used as fine aggregate confirming to IS: 383-1970 of Zone III for concrete ...

Mechanical, durability and microstructure properties of ...

However, the resulting concrete properties of this LWA have not been investigated. In this paper, this LWA will be utilised to produce lightweight aggregate concrete (LWAC) and the mechanical, durability and microstructure properties will be investigated.

Use of Blast Furnace Slag Aggregate in Concrete - IJSER

strength of Blast Furnace Slag aggregate concrete is found to be higher than that of conventional concrete at the age of 90 days. It has also reduced water absorption and porosity beyond 28 days in comparison to that of conventional concrete with stone chips used as coarse aggregate.

Strength And Durability Studies On High Performance ...

fine aggregate in the production of concrete, is expensive due to ... consistency to be used as a substitute of river sand.The mechanical and durability properties of concrete incorporating ...

Influence of Foundry Sand and Natural Pozzolans on the ...

on the use of waste foundry sand as replacement of fine aggregate (river sand) to produce lightweight concrete (LWC) with VA based blended cement and coarse pumice aggregate. The effect of foundry sand content on strength and long-term durability (up to one year) as well as micro-structural characteristics of LWCs is described.

STRENGTH AND DURABILITY STUDIES ON CONCRETE MADE WITH ...

increased use of concrete has created a huge demand for fine aggregate. However, the natural river sand has been used as fine aggregate for making concrete. Being a natural resource, the fine aggregate get depleted due to their use in making concrete. The use of natural river sand has been becoming very expensive due to limited

Experimental Investigation on Mechanical & Durability of ...

Experimental Investigation on Mechanical & Durability of Concrete Containing fly ash and Quarry Dust M.Bharath 1, M ... 2.5. This study contains belongs to normal weight aggregate. By using this artificial aggregate the compressive strength of ... Fine aggregate. The properties of sand were found in laboratory as per procedure given in IS 383 ...

Effect of different types of fine aggregates on mechanical ...

concrete with natural sand increased by 7.72% after fully replacing by artificial sand at 7 days and 3.98% at 28 days. The indirect split tensile strength of concrete with river sand as fine aggregate found marginally higher than concrete with artificial sand as fine aggregate, it is 3.78 MPa and 3.71 MPa respectively.

Aggregates - Iowa Department of Transportation

Factors Relating to Aggregate Durability in Portland Cement Concrete - January ... Evaluation of Fly Ash Concrete Durability Containing Class II Durability Aggregates, 1986 ... MLR-8806: Fly Ash Affect on Alkali-Aggregate Reactivity. Abstract. Report. 1989: MLR-8807: A Study of Fine Sand From Nine Mile Island at Dubuque, 1988. Abstract Report ...